1. Follow the general rules for safe operation of laser cutting machines. Strictly follow the start-up procedure of the laser cutting machine to start the laser, adjust the light, and test the machine.

2. Operators must be trained, familiar with cutting software, laser cutting equipment structure and performance, and master the relevant knowledge of the operating system.

3. Wear labor protection articles according to the regulations, and wear protective glasses that meet the regulations near the laser beam.

4. Before determining whether the material can be irradiated or cut by laser, do not process the material to avoid the potential danger of smoke and steam.

5. When the laser cutting machine is started, the operator shall not leave the post without authorization or be managed by a trustee. If it is really necessary to leave, the operator should stop the machine or cut off the power switch.

6. If any abnormality is found during the processing of the laser cutting machine, it should be stopped immediately, and the fault should be eliminated in time or reported to the supervisor.