Archive for category: Laser Engraver News

Today’s article mainly introduces an integral part of the laser engraving machine – the reflector. Experienced laser engraving machine ...

Crash situation and handling method 01The seal system crashed, and every key on the keyboard did not respond, and the laser engraving machine crash...

When it comes to the difference between a laser engraving machine and a CNC engraving machine, the most obvious difference is that the laser engraving...

1. Check whether the sensor is dusty, poorly connected or damaged (wipe off the dust on the sensor or replace it); 2. Check whether the data cable ...

1). Hand wash, blow dry or leave to dry. 2). Put on finger cots. 3). Gently take out the lens for inspection. 4). Blow off the dust on the su...

1: It is strictly forbidden to start the machine without grounding. The grounding of all parts of the machine must be completely reliable to prevent s...

Alarm failure The overtravel alarm means that the machine has reached the limit position during operation, please follow the steps below to check: ...

The top ten precautions for the safety protection of laser engraving machines are: (1) Avoid looking directly at the laser light with your eyes. ...

As a brand-new processing method, laser engraving machine processing has gradually been widely used in the leather, textile and garment industries due...

How to choose a laser engraving machine? There are many kinds of laser engraving machines on the market, including imported machines with original ...