News & Blog

The laser cutting system consists of a laser generator, a beam transmission component, a workbench (machine tool), a microcomputer numerical control c...

Laser cutting machine According to different lasers, it can be divided into: CO2 laser cutting machine, YAG laser cutting machine and fiber laser cu...

laser cutting machine Reason 1: The engraving resolution is too high. Solution: adjust. Reason 2: The driving current is too small. Soluti...

Laser cutting machine 1. Beam characteristics: The incision width of laser cutting has a great relationship with the spot diameter after focusing. S...

laser cutting machine lens The protective laser cutting machine lens is located at the lower part of the centering module, which is easily polluted ...

Laser cutting machine 1. Wear labor protection articles according to the regulations, and wear protective glasses that meet the regulations near the...

Laser cutting machine First determine whether the center height of the laser frame is the same as the center height of the laser frame. Generally, l...

laser cutting machine 1. Cutting speed, according to the actual test results in the laser field, the cutting speed of the laser cutting machine is m...

Laser cutting of aluminum plates also depends on the power of the laser generator. The thickest material can be cut, but the processing cost is high b...

1. Comply with the general safety operating rules of the cutting machine. Strictly follow the laser startup program to start the laser, adjust the lig...